Chauvet Washer 260 LED User Manual

Quick Reference Guide  
 
Q-Wash 260-LED QRG  
Operating modes:  
9-channel: Pan, tilt, red, green, blue, color/macros, dimmer,  
strobe, control  
Features  
13-channel: Pan, pan fine, tilt, tilt fine, pan/tilt speed, red,  
green, blue, color/macros, dimmer, strobe, and  
control  
Pan: 540  
Tilt: 270  
RGB static color mixing with or without DMX control  
Electronic strobe (1~20 Hz)  
Electronic dimmer (0~100%)  
High power setting  
Remote product reset and vector speed channel  
Auto programs  
Sound activated programs  
255-step fully customizable program  
Recall auto or custom programs via control panel or DMX  
Color temperature presets (3,200~10,000 K)  
Color calibration  
Fan speed control  
3-pin DMX input and output connectors  
LCD screen with password protection  
The Q-Wash 260-LED is an RGB LED wash moving head with  
multiple narrow beams. The product consists of a base and a moving  
head on a yoke. The LEDs are inside ducts, which, along with  
special optics, provide a very narrow beam angle.  
Product  
Description  
LCD  
Control Panel  
Front Panel  
Product Overview  
Power Input  
Fuse Holder  
Power Switch  
DMX In/Out  
Rear Panel  
Page 3 of 10  
 
Q-Wash 260-LED QRG  
This product has an auto-ranging power supply that can work with  
an input voltage range of 100~240 VAC, 50/60 Hz.  
AC Power  
Fuse 1. Wedge the tip of a flat head screwdriver into the slot of the fuse  
Replacement  
holder and pry the safety cap out of its housing. It will pull the  
installed fuse with it.  
2. Remove the blown fuse from its safety cap and replace it with a  
fuse of the exact same type and rating (F 3.15 A, 250 V).  
3. Insert the fuse holder back into its place, and reconnect power.  
The Q-Wash 260-LED can work with a DMX controller using a  
regular DMX serial connection.  
DMX Linking  
If you are not familiar with the DMX standard, please download the  
DMX Connection  
The Q-Wash 260-LED uses a regular DMX data connection for  
DMX personalities, BASIC, and ADVANCED.  
Download the Q-Wash 260-LED User Manual and refer to the Setup  
chapter to learn how to connect this product for DMX operation, and  
the Operation chapter to learn in detail how to configure this product  
for DMX operation.  
Master/Slave  
Connection  
The Q-Wash 260-LED uses the DMX data connection for its  
Master/Slave mode.  
Download the Q-Wash 260-LED User Manual and refer to the Setup  
chapter to learn how to connect this product for Master/Slave  
operation, and the Operation chapter to learn in detail how to  
configure this product for Master/Slave operation.  
Before mounting this product, read the safety notes at the beginning  
of this guide and on page 2 of the product’s User Manual. Then,  
follow the mounting procedure indicated in the Setup chapter of the  
User Manual.  
Mounting  
C clamps (not included)  
Safety cable (included)  
Mounting brackets (included)  
Product  
Mounting  
Diagram  
Overhead Mounting  
Floor Standing  
Page 4 of 10  
 
Q-Wash 260-LED QRG  
Programming For details on how to program this product, please refer to the  
product’s User Manual.  
Control Panel  
Description  
Button Function  
<MENU> Exits from the current menu or function  
Enables the currently displayed menu or sets the  
currently selected value into the selected function  
<ENTER>  
Navigates upwards through the menu list and  
increases the numeric value when in a function  
<UP>  
Navigates downwards through the menu list and  
decreases the numeric value when in a function  
<DOWN>  
After being prompted to enter the password, press:  
Password  
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>.  
Start Address  
To ensure full access to all channels in each DMX mode, the  
highest recommended DMX addresses are as follows:  
Mode  
Address  
Mode  
Address  
BASIC  
504  
ADVANCED  
500  
Editing Notes  
When in EDIT and CALIB modes, <UP> and <DOWN> only  
change the value of the selected option.  
To move to the next option press <ENTER> repeatedly. Refer  
to  
the  
Q-Wash 260-LED User Manual for more details.  
Page 5 of 10  
 
Q-Wash 260-LED QRG  
Menu Options  
1st Level  
Programming Levels  
Description  
Selects a starting DMX address  
Resets the product’s custom settings  
Select the fan’s operation mode.  
ADDRESS  
RESET  
001~512  
NO/YES  
HIGH  
NORMAL  
LOW  
AUTO  
NOTE: Fixture’s controller will force the fan to High if the  
product’s internal temperature becomes too high, despite any  
manual or DMX setting  
FANS  
DMX512  
AUTO1  
AUTO2  
CUSTOM  
SOUND1  
SOUND2  
SLAVE  
TEST  
Selects DMX running mode  
Selects the first automatic program  
Selects the second automatic program  
Selects the user customizable program  
Selects the first sound program  
Selects the second sound program  
Selects the Slave running mode  
RUN  
INTRO  
Starts the product’s test sequence  
BASIC  
Selects the 9-channel DMX mode  
CHANNELS  
ADVANCED Selects the 12-channel DMX mode  
60 CLOSE  
BRIGHT  
NO/YES  
Turns off the display after 60 seconds  
Keeps the display on  
Activates/deactivates the control panel password  
DISPLAY  
KEYLOCK  
DIMMER  
DIMMER 4~1 Slow (DIM 4) to fast (DIM1) dimmer curves  
DIMMER 0  
EDITION  
Linear dimmer  
Shows the version of the installed S/W  
Defines the pan direction  
Defines the tilt direction  
Defines the direction of the dimmer fader  
Activates the changes  
INFO  
PAN  
TILT  
DIMMER  
USE  
NORMAL/  
REVERSE  
INVERT  
RANGE  
NO/YES  
P/START  
P/FINISH  
T/START  
T/FINISH  
USE  
Sets the pan start point (restricted range)  
Sets the pan end point (restricted range)  
Sets the tilt start point (restricted range)  
Sets the tilt end point (restricted range)  
Activates the changes  
000~255  
NO/YES  
DMX  
SYSTEM  
Activates the move-in black delay (3 s)  
The DMX controller can reset the product  
The control panel can reset the product  
LEDs illuminate at normal or high intensity  
NOTE: The product will return to Normal if the internal  
temperature becomes too high  
BLACKD  
RESET  
NORMAL/  
HIGH  
POWER  
UC  
RGBTOW  
OFF  
DMX  
SYSTEM  
White output matches that of older products  
White output set by RGB-W  
SPECIAL  
COLOR  
FAN  
White output defined by RGBW faders  
The DMX controller can set the fan speed  
The control panel can reset the fan speed  
In case of lost DMX signal, the product will remain in its current  
state  
SAVE  
BLAK  
DMXERROR  
In case of lost DMX signal, the product will blackout  
STEP  
PAN  
Selects the program step  
Selects the pan position  
Selects the tilt position  
Selects the pan/tilt speed  
EDIT  
000~255  
TILT  
SPEED  
1st Level  
Programming Levels  
Description  
RED  
GREEN  
BLUE  
Combines red, green, blue, and white to obtain a custom color  
DIMMER  
STROBE  
DIMSPEED  
TIME  
000~255  
Selects the dimmer value  
EDIT (Cont.)  
EXTRA  
Selects the strobe frequency and mode  
Selects the dimmer speed  
Selects the step duration  
USE  
NO/YES  
****  
Activates the changes  
PASSWORD  
Opens the Extra menu (see below)  
Page 6 of 10  
 
Q-Wash 260-LED QRG  
Extra Menu  
1st Level  
2nd Level  
3rd Level  
4th Level  
Description  
RED  
GREEN  
BLUE  
RED  
3200 K  
000~255  
Sets color temperature for Macro > White 1  
3400 K  
4200 K  
4900 K  
5600 K  
5900 K  
6500 K  
7200 K  
8000 K  
8500 K  
10000 K  
GREEN  
BLUE  
RED  
GREEN  
BLUE  
RED  
GREEN  
BLUE  
RED  
GREEN  
BLUE  
RED  
GREEN  
BLUE  
RED  
GREEN  
BLUE  
RED  
GREEN  
BLUE  
RED  
GREEN  
BLUE  
RED  
000~255  
000~255  
000~255  
000~255  
000~255  
000~255  
000~255  
000~255  
000~255  
000~255  
Sets color temperature for Macro > White 2  
Sets color temperature for Macro > White 3  
Sets color temperature for Macro > White 4  
Sets color temperature for Macro > White 5  
Sets color temperature for Macro > White 6  
Sets color temperature for Macro > White 7  
Sets color temperature for Macro > White 8  
Sets color temperature for Macro > White 9  
Sets color temperature for Macro > White 10  
Sets color temperature for Macro > White 11  
CALIB  
GREEN  
BLUE  
RED  
GREEN  
BLUE  
RED  
GREEN  
BLUE  
NO/YES  
Sets color temperature for SPECIAL > COLOR >  
RGBTOW  
RGB-W  
000~255  
DEFAULT  
DEFAULT  
N/A  
Defaults the product to factory settings  
Page 7 of 10  
 
Q-Wash 260-LED QRG  
DMX Values  
Channel Function  
Value  
000 255 0~540º  
000 255 0~270º  
000 255  
000 255  
000 255  
Percent/Setting  
BASIC  
1
2
3
4
5
Pan  
Tilt  
Red  
Green  
Blue  
0~100%  
0~100%  
0~100%  
000 005 No function  
006 010 High power  
011 030 R: 100% G: Up  
B: 0%  
031 050 R: Down G: 100% B: 0%  
051 070 R: 0%  
071 090 R: 0%  
091 110 R: Up  
111 130 R: 100% G: 0%  
131 150 R: 100% G: Up  
G: 100% B: Up  
G: Down B: 100%  
G: 0%  
B: 100%  
B: Down  
B: Up  
151 170 R: Down G: Down B: 100%  
171 200 R: 100% G: 100% B: 100%  
201 205 White 1: 3200 K  
206 210 White 2: 3400 K  
211 215 White 3: 4200 K  
216 220 White 4: 4900 K  
221 225 White 5: 5600 K  
226 230 White 6: 5900 K  
231 235 White 7: 6500 K  
236 240 White 8: 7200 K  
241 245 White 9: 8000 K  
246 250 White 10: 8500 K  
251 255 White 11: 10,000 K  
000 255 0~100%  
Power and Color  
Macro  
6
7
8
Dimmer  
Strobe  
000 009 No function  
010 255 01~20 Hz  
000 019 No function  
020 039 Pan/tilt black activation  
040 059 Pan/tilt black deactivation  
060 079 Automatic fan speed  
080 099 Slow fan speed  
100 119 Normal fan speed  
120 139 High fan speed  
9
Control  
140 149 Auto program 1 (3 s activation delay)  
150 159 Auto program 2 (3 s activation delay)  
160 169 Test (3 s activation delay)  
170 179 Custom program (3 s activation delay)  
180 199 No function  
200 219 Reset (3 s activation delay)  
220 255 No function  
Page 8 of 10  
 
Q-Wash 260-LED QRG  
Channel Function  
Value  
000 255 0~540º  
000 255 Fine movement control  
000 255 0~270º  
000 255 Fine movement control  
000 255 Fast~Slow  
000 255  
000 255  
000 255  
Percent/Setting  
ADVANCED  
1
2
3
4
5
6
7
8
Pan  
Pan Fine  
Tilt  
Tilt Fine  
Pan/Tilt Speed  
Red  
Green  
Blue  
0~100%  
0~100%  
0~100%  
000 005 No function  
006 010 High power  
011 030 R: 100% G: Up  
B: 0%  
031 050 R: Down G: 100% B: 0%  
051 070 R: 0%  
071 090 R: 0%  
091 110 R: Up  
111 130 R: 100% G: 0%  
131 150 R: 100% G: Up  
G: 100% B: Up  
G: Down B: 100%  
G: 0%  
B: 100%  
B: Down  
B: Up  
151 170 R: Down G: Down B: 100%  
171 200 R: 100% G: 100% B: 100%  
201 205 White 1: 3200 K  
206 210 White 2: 3400 K  
211 215 White 3: 4200 K  
216 220 White 4: 4900 K  
221 225 White 5: 5600 K  
226 230 White 6: 5900 K  
231 235 White 7: 6500 K  
236 240 White 8: 7200 K  
241 245 White 9: 8000 K  
246 250 White 10: 8500 K  
251 255 White 11: 10,000 K  
000 255 0~100%  
Power and Color  
Macro  
9
10  
11  
Dimmer  
Strobe  
000 009 No function  
010 255 01~20 Hz  
000 019 No function  
020 039 Pan/tilt black activation  
040 059 Pan/tilt black deactivation  
060 079 Automatic fan speed  
080 099 Slow fan speed  
100 119 Normal fan speed  
120 139 High fan speed  
12  
Control  
140 149 Auto program 1 (3 s activation delay)  
150 159 Auto program 2 (3 s activation delay)  
160 169 Test (3 s activation delay)  
170 179 Custom program (3 s activation delay)  
180 199 No function  
200 219 Reset (3 s activation delay)  
220 255 No function  
Page 9 of 10  
 
Q-Wash 260-LED QRG  
World Headquarters  
CHAUVET®  
General Information  
United Kingdom and Ireland  
CHAUVET® Europe Ltd.  
General Information  
Address:  
Contact Us  
Address:  
5200 NW 108th Avenue  
Unit 1C  
Sunrise, FL 33351  
(954) 929-1115  
(954) 929-5560  
(800) 762-1084  
Brookhill Road Industrial Estate  
Pinxton, Nottingham, UK  
NG16 6NT  
Voice:  
Fax:  
Toll free:  
Voice:  
Fax:  
+44 (0)1773 511115  
+44 (0)1773 511110  
Technical Support  
Technical Support  
Voice:  
Fax:  
(954) 929-1115 (Press 4)  
(954) 756-8015  
Email:  
Email:  
World Wide Web  
World Wide Web  
Q-Wash 260-LED QRG – Rev. 05  
© Copyright 2011 CHAUVET®  
All rights reserved  
Printed in the P. R. C.  
Page 10 of 10  
 

Belkin Network Router F1P1210ENAU User Manual
Black Decker Vacuum Cleaner VM2200 User Manual
Blodgett Convection Oven SHO E User Manual
Blue Rhino Patio Heater 200209 450000 User Manual
Boston Acoustics Car Speaker SX85 User Manual
Brady Label Maker 76800 User Manual
Canon Camera Lens 86 User Manual
Canon High Chair G1 User Manual
Chief Manufacturing Camera Accessories RPA4000 User Manual
Chromalox Electric Heater CVEP C User Manual