Broilmaster Burner DPSBSS User Manual

SIDE BURNER OWNERS MANUAL  
MODEL DPSBSS  
(NATURAL OR PROPANE)  
®
FOR USE WITH BROILMASTER PREMIUM GAS GRILLS  
RETAIN OWNERS MANUAL FOR FUTURE REFERENCE.  
B100027-0-0202  
Page 1  
 
TABLE OF CONTENTS  
CONGRATULATIONS!  
You have chosen the finest side burner for your outdoor cooking pleasure. Please take time  
to read this entire manual before assembling your premium Broilmaster® gas side burner.  
C22  
Parts Diagram...............................................................................................................................4  
Parts List ......................................................................................................................................5  
Side Burner Assembly...............................................................................................................6-7  
Propane Gas Connection ........................................................................................................8-10  
Natural Gas Connection ........................................................................................................ 11-12  
Operation and Maintenance.......................................................................................................13  
Gas Leaks...............................................................................................................................13  
Operation ................................................................................................................................... 13  
Notes ........................................................................................................................................14-15  
Your Broilmaster® Side Burner is identified by model number, serial number, and gas  
type. This information is provided on a product identification label located on the Side  
Burner. The grill’s model number, serial number, and gas type must also be provided  
when contacting your Broilmaster® dealer. For your convenience, complete this section  
for future reference when contacting your dealer.  
Grill Information  
Model No.  
Dealer  
Serial No.  
Dealer Phone No.  
Date of Purchase  
GasType: Propane  
Natural  
Natural  
Side Burner Information  
DPSBSS  
Model No.  
Dealer  
Serial No.  
Dealer Phone No.  
Date of Purchase  
GasType: Propane  
DPSBSS  
Page 3  
 
PARTS DIAGRAM  
SIDE BURNER EXPLODED VIEW  
Page 4  
DPSBSS  
 
PARTS LIST  
All repair part orders should be placed through your local Broilmaster® dealer. To locate a dealer in your  
area, contact Broilmaster Customer Service at 800-851-3153 WWW.broilmaster.com. To ensure prompt and  
accurate service, please provide the following information when placing a repair part order: Model number  
of your Side Burner, Part Name, Part Number, and Quantity of parts needed.  
Key  
No.  
1
Part Name  
Bumper  
Qty.  
2
Part Number  
B100103  
2
3
10 X 3/8 Screw  
2
1
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B053779  
B070100  
B072698  
B072684  
B070483  
B070084  
B072218  
B100130  
B070081  
B069747  
B100136  
B100125  
B059229  
B076984  
B076985  
B072217  
B100226  
B073270  
B100278  
B070323  
B070142  
B070487  
B070289  
B070108  
B070584  
B073953  
B100227  
B073100  
Cooking Grid  
4
Control Panel Label  
Ignitor Ground Wire  
Valve  
5
6
7
Valve Knob  
8
Electronic Ignitor  
9
10-24 X 3/8 Screw  
Tie-Down Bracket  
Ignitor Ground Lug  
9/32 Flat Washer  
10-24 Wing Nut  
10  
11  
12  
13  
14  
15  
16  
17  
18  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
Handle  
Side Burner Lid  
Side Burner Body  
1/4-20 X 3/4 Phillips Truss Screw  
Orifice (LP) No. 89  
Orifice (NAT) No. 173  
Burner Complete (Includes 18, 25, 26, 27)  
Tee Fitting  
Mounting Plate  
Side Burner S/S Flex Line 10"  
Side Burner S/S Flex Line 34"  
Manifold Tube  
Burner Cap  
Ring (LP Only) (Not SHown)  
Burner (Not Shown)  
Handle Shelf Bracket  
DPSBSS  
Page 5  
 
SIDE BURNER ASSEMBLY  
Instructions  
Igniter Assembly  
All Broilmaster® side burners require some assembly  
and installation. Certain instructions may not apply  
to your model of side burner. This side burner requires  
the same gas type (natural or liquid propane) as your  
Broilmaster® gas grill. Your side burner is factory  
equipped for LP gas. Natural gas conversion  
instructions are located in the Natural Gas section of  
this manual.  
Attach one end of the igniter wire (5) to the open terminal  
on the back of the electronic igniter.  
Install AAAlkaline battery  
FIGURE 2  
Igniter Wire (5)  
Electronic  
Igniter (8)  
Please locate and follow in listed order only the  
instructions for assembly and installation of the  
correct gas type. Skip any sections that do not pertain  
to the side burner model you have purchased.  
PreAssembly  
+
-
Every assembly and installation instruction includes  
detailed illustrations to aid in assembly.  
AA Alkaline  
Compare the materials found in the shipping container  
to the parts list provided. Every effort has been made  
to ensure the correct parts have been provided. In  
the event of an error, please contact your local  
Broilmaster® dealer regarding the replacement of  
missing parts.  
Burner (21)  
Battery  
Positioning Side Burner  
Slide side burner right side up onto right grill pull handle.  
Attach with one 1/4-20 x 3/4 screw (17). FIGURE 3.  
The following items are needed for the assembly of  
your side burner:  
Phillips screwdriver  
Two adjustable wrenches  
Soapy water solution (to test for leaks)  
FIGURE 3  
Grill Pull Handle  
Attach the pull handle to the right side of the grill as  
illustrated in Figure 1. Place two bolts into holes in  
pull handle and through holes on right sides of grill  
bottom. Fasten each bolt with a washer, lock washer  
and nut.  
17  
FIGURE 1  
Page 6  
DPSBSS  
 
SIDE BURNER ASSEMBLY  
Lid Handle  
Mounting Side Burner  
Insert the notched end of the tie-down bracket  
(10) into the slot on the mounting plate (21). Push  
the other end of the tie-down bracket onto the  
screw. Fasten with an igniter ground lug (11), a  
washer (12) and wing nut (13). FIGURE 4.  
Attach the lid handle (14) to the side burner lid  
(15) using two phillips head self-tapping screws  
(2). FIGURE 6.  
Handle (14)  
FIGURE 6  
13  
FIGURE 4  
Lid (15)  
12  
11  
Tie-Down  
Bracket (10)  
Mounting  
Plate (23)  
Cooking Grid  
Position the cooking grid (3) over the burner as  
shown by FIGURE 7.  
FIGURE 7  
Attach the igniter ground wire (5) onto the igniter  
ground lug (11) terminal. FIGURE 5.  
Cooking Grid (3)  
FIGURE 5  
Igniter  
Ground Wire (5)  
11  
DPSBSS  
Page 7  
 
PROPANE GAS CONNECTION  
Side Burner Location  
Gas Type  
Your Broilmaster® side burner is factory equipped  
for LP gas. Natural gas conversion instructions  
are located in the Natural Gas section of this  
manual. Never use liquid propane gas with a grill  
designed for natural gas, or natural gas with a grill  
designed for liquid propane gas. The type gas  
required for your grill can be determined from its  
product identification label. Questions regarding  
different types of gases should be directed to your  
gas supplier.  
Your grill and side burner have been designed for  
outdoor use ONLY.  
This side burner mounts on the right side of a  
Broilmaster® gas grill and cannot be used with  
another grill or for any other purpose.  
You should never install or operate your grill and  
side burner in any building, garage, or other  
enclosed area.  
For your safety, the grill and side burner  
should not be installed or operated under any  
combustible materials, such as carports,  
covered porches, awnings, or overhangs.  
Cylinder Requirements  
Your Broilmaster® Premium Gas Grill requires a  
standard twenty (20) pound propane gas cylinder.  
Never install or use your grill and side burner  
in or on any recreational vehicle or boat.  
The propane gas cylinder used must be:  
1. constructed and marked in accordance with the  
specifications for LP gas cylinder of the U.S.  
Department of Transportation (D.O.T.) or the  
National Standard of Canada, CAN/CSA-B339,  
Cylinders, Spheres, and Tubes forTransportation  
of Dangerous Goods; and Commission as  
CAUTION: THE INSTALLATION AND OPERATION OF  
THIS GRILL AND SIDE BURNER AT CLEARANCES LESS  
THAN SPECIFIED BELOW MAY CAUSE A FIRE, PROPERTY  
DAMAGE, OR PERSONAL INJURY.  
A minimum clearance of sixteen (16") inches is  
required from all sides of the side burner to any  
combustible material. Refer to the grills Owners  
Manual for specific grill clearances.  
applicable.  
2. provided with a listed overfilling protection device  
(OPD).  
3. provided with a listed safety device having direct  
access with the vapor space of the cylinder and  
the cylinder supply system must be arranged  
for vapor removal.  
Examples of combustible materials are patio  
furniture, fences, or the wall of your home.  
4. provided with a shutoff valve terminating in a  
valve outlet as specified in the Standard for  
Compressed Gas Cylinder Outlet and Inlet  
Connections, ANSICGA-V-1.  
5. provided with a plug to effectively seal off the  
cylinder outlet when the cylinder is being stored  
or transported.  
The area surrounding the grill and side burner  
should be clear to ensure proper ventilation. Do  
not obstruct the flow of combustion and ventilation  
air in any way. The ventilation openings on the  
propane cylinder enclosure must also remain free  
and clear of debris.  
6. provided with a collar to protect the cylinder  
valve.  
Portable grills with side burners should be level  
and positioned away from direct wind prior to each  
use.  
CAUTION: DO NOT USE A PROPANE GAS CYLINDER  
WHICH HAS A CAPACITY GREATER THAN TWENTY (20)  
POUNDS WITH THIS GRILL AND SIDE BURNER.  
WARNING: DO NOT INSTALL OR OPERATE THIS  
GRILL AND SIDE BURNER WHERE GASOLINE OR OTHER  
FLAMMABLE MATERIALS ARE USED OR STORED. FAILURE  
TO COMPLY WITH THIS WARNING COULD RESULT IN  
EXPLOSION OR FIRE CAUSING PROPERTY DAMAGE OR  
PERSONAL INJURY.  
Page 8  
DPSBSS  
 
PROPANE GAS CONNECTION  
Propane Cylinder Safety  
Liquid propane gas has a long history of safe use  
when the safety precautions provided in this  
manual are followed.  
Connection Requirements  
CAUTION: NEVER USE LIQUID PROPANE GAS IN A GRILL  
DESIGNED FOR NATURAL GAS, OR NATURAL GAS IN A  
GRILL DESIGNED FOR LIQUID PROPANE GAS. QUESTIONS  
REGARDING DIFFERENT TYPES OF GASES SHOULD BE  
DIRECTED TO YOUR LOCAL GAS COMPANY.  
FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS  
COULD RESULT IN A FIRE OR EXPLOSION CAUSING  
PROPERTY DAMAGE OR PERSONAL INJURY.  
Installation must conform to local codes or, in the  
absence of local codes, with the National Fuel Gas  
Code, ANSI Z223.1. In Canada, installation shall  
be in accordance with CAN/CGA-B149.2 Propane  
Installation Code, or CAN/CGA-B149.1 Natural  
Gas Installation Code, and local codes where  
applicable. Consult your local gas company or  
Propane gas dealer for code regulations and  
recommended procedures.  
Propane gas cylinders should always be handled,  
stored, and transported with extreme caution in a  
secured upright position.  
Never attempt to use or repair a propane gas  
cylinder that has been damaged. Never attempt  
to use or repair a cylinder with a faulty or damaged  
valve outlet. A cylinder that has been dropped,  
dented, or otherwise damaged must be replaced.  
®
WARNING: BROILMASTER GAS GRILLS AND SIDE  
BURNERS REQUIRE LIQUID PROPANE CYLINDERS  
EQUIPPED WITH AN OVERFILL PROTECTION DEVICE  
(OPD). AN OVERFILLED OR IMPROPERLY FILLED  
PROPANE CYLINDER CAN BE DANGEROUS.  
A propane gas cylinder should never be  
transported in the passenger area of a vehicle.  
Keep cylinders out of direct sunlight and never  
apply any other source of direct heat to them.  
Always use the pressure regulator and hose  
assembly supplied with your propane gas grill.  
When refilling your cylinder, always insist on a  
reputable, qualified gas dealer. Your propane gas  
cylinder is filled by weight, and should never  
exceed eighty (80%) percent of its weight limit. If  
the cylinder is not completely empty, the gas  
dealer must make necessary adjustments to  
ensure it is not overfilled. Never use an overfilled  
Propane gas cylinder.  
Note: Not all valve and cylinder combinations are  
compatible. Check warning tag on valve and  
cylinder as well as external fitting threads.  
All Broilmaster® pressure regulators and hose  
assemblies require propane cylinders with a Type  
1 connection device as illustrated by Figure 8.  
Cylinder Storage  
Your grill must be stored outdoors in a well  
ventilated area if the cylinder is attached to it.  
FIGURE 8  
Disconnected cylinders must have a threaded  
valve plug tightly installed and must not be stored  
in any building, garage, or other area.  
Flammable materials (gasoline, grill covers, etc.)  
must not be stored in the cylinder enclosure.  
Always store propane cylinders in a secured  
upright position, out of the reach of children.  
DPSBSS  
Page 9  
 
PROPANE GAS CONNECTION  
Pressure Regulator and  
10" S/S flex line (22)  
FIGURE 10  
Hose Assembly  
The pressure regulator has an outlet pressure of not  
more than eleven (11") inches water column. It must  
be connected to the propane gas cylinders female  
valve outlet before the grill and side burner can be  
operated.  
Grill Gas Valve  
"Tee" (20)  
Connecting to Propane Gas  
Attach one end of the 34" S/S flex line (23) to the  
end of the side burner valve (6). Attach the remaining  
end of the hose to the "tee" (20) and use two  
wrenches to tighten the S/S flex line connections.  
One wrench should be used to turn the S/S flex line  
connector while the "tee" or valve is held with the  
second wrench. FIGURE 11.  
CAUTION: OPERATION OF A PROPANE GAS GRILL AND  
SIDE BURNER WITHOUT THE PRESSURE REGULATOR AND  
HOSE ASSEMBLY WILL CAUSE GAS LEAKS WHICH COULD  
LEAD TO FIRE OR EXPLOSION, RESULTING IN PROPERTY  
DAMAGE OR PERSONAL INJURY.  
The pressure regulators fitting must remain clean  
and free of nicks and scratches. A dirty, nicked or  
scratched fitting can cause a gas leak, resulting in  
an explosion or fire. Use only genuine Broilmaster®  
replacement parts unless otherwise specified by the  
manufacturer.  
34" S/S flex line (23)  
"Tee" (20)  
6
FIGURE 11  
Installing "Tee" Connector  
If your grill is equipped with a factory installed gas  
"tee" behind the grills control panel, please skip to  
the next section.  
For old Broilmaster grill, this alternate tee fitting kit  
must be ordered.  
Turn OFF the gas valve at the propane cylinder.  
Disconnect the regulator and hose assembly from  
the cylinder. Disconnect hose from the gas valve  
located under the grills control panel. FIGURE 9.  
FIGURE 9  
Grill Gas Valve  
Hose Assembly  
Attach the regulator and hose assembly to the brass  
tee" (20). Reconnect the assembly to the cylinder.  
Use two adjustable wrenches to hold and tighten  
the joint between the hose and "tee". FIGURE 12.  
20  
Installing TeeConnector  
(Continued)  
FIGURE 12  
Attach one end of the 10" S/S flex line (22) to the  
end of the grills gas valve. Attach the other end of  
the S/S flex line to the brass "tee" (20). FIGURE 10.  
NOTE: GRILLS MANUFACTURED PRIOR TO 1999 MAY REQUIRE  
THE ALTERNATE "TEE" CONNECTOR.  
Page 10  
DPSBSS  
 
NATURAL GAS CONNECTION  
Side Burner Location  
Your grill and side burner have been designed for  
Gas Type  
Your Broilmaster® side burner is factory equipped  
for LP gas and must be converted for use with  
Natural gas grills. Never use liquid propane gas  
with a grill designed for natural gas, or natural gas  
with a grill designed for liquid propane gas. The  
type gas required for your grill can be determined  
from its product identification label. Questions  
regarding different types of gases should be  
directed to your gas company.  
outdoor use ONLY.  
This side burner mounts on the right side of a  
Broilmaster® gas grill and cannot be used with  
another grill or for any other purpose.  
You should never install or operate your grill and  
side burner in any building, garage, or other  
enclosed area.  
CAUTION: NEVER USE LIQUID PROPANE GAS IN A GRILL  
DESIGNED FOR NATURAL GAS, OR NATURAL GAS IN A  
GRILL DESIGNED FOR LIQUID PROPANE GAS. QUESTIONS  
REGARDING DIFFERENT TYPES OF GASES SHOULD BE  
DIRECTED TO YOUR LOCAL GAS COMPANY.  
For your safety, the grill and side burner should  
not be installed or operated under any combustible  
materials, such as carports, covered porches,  
awnings, or overhangs.  
Never install or use your grill and side burner in  
or on any recreational vehicle or boat.  
BURNER  
TOP  
CAUTION: THE INSTALLATION AND OPERATION OF  
THIS GRILL AND SIDE BURNER AT CLEARANCES LESS  
THAN SPECIFIED BELOW MAY CAUSE A FIRE, PROPERTY  
DAMAGE, OR PERSONAL INJURY.  
89  
BRASS  
ORIFICE  
DENOTES (LP)  
BRASS ORIFICE  
SHUTTER  
SCREW  
SHUTTER  
RING  
173  
DENOTES  
(NAT) BRASS  
ORIFICE  
A minimum clearance of sixteen (16") inches is  
required from all sides of the side burner to any  
combustible material. Refer to the grills Owners  
Manual for specific grill clearances.  
SIDE  
BURNER  
Examples of combustible materials are patio  
furniture, fences, or the wall of your home.  
1. Remove shutter screw. Important: Do not  
discard this screw; it will be reinstalled.  
The area surrounding the grill and side burner  
should be clear to ensure proper ventilation. Do  
not obstruct the flow of combustion and ventilation  
air in any way. The ventilation openings on the  
propane cylinder enclosure must also remain free  
and clear of debris.  
2. Remove shutter ring. The shutter ring is not  
used for Natural gas, but retain for future use  
if LP conversion is desired.  
3. Use a 7 mm nut driver or socket wrench to  
remove the LP orifice and replace it with the  
Natural gas orifice supplied.  
Portable grills with side burners should be level  
and positioned away from direct wind prior to each  
use.  
4. Replace the shutter screw.  
5. Turn set screw in center of valve stem 1/2 turn  
counterclockwise.  
WARNING: DO NOT INSTALL OR OPERATE THIS  
GRILL AND SIDE BURNER WHERE GASOLINE OR OTHER  
FLAMMABLE MATERIALS ARE USED OR STORED. FAILURE  
TO COMPLY WITH THIS WARNING COULD RESULT IN  
EXPLOSION OR FIRE CAUSING PROPERTY DAMAGE OR  
PERSONAL INJURY.  
6. Apply soapy solution to test for leaks around  
the set screw. If a leak is found, turn screw  
clockwise until bubbles cease.  
IMPORTANT: PLACE CONVERSION LABEL INSIDE LID  
ADJACENT TO SERIAL NUMBER LABEL.  
DPSBSS  
Page 11  
 
NATURAL GAS CONNECTION  
Connection Requirements  
Attach one end of the 10" S/S flex line (22) to the  
end of the grills gas valve.  
Installation must conform to local codes or, in the  
absence of local codes, with the National Fuel Gas  
Code, ANSI Z223.1. In Canada, installation shall  
be in accordance with CAN/CGA-B149.2 Propane  
Installation Code, or CAN/CGA-B149.1 Natural  
Gas Installation Code, and local codes where  
applicable. Contact your local gas company for  
code regulations, recommended procedures, and  
the installation of your grills gas supply line.  
Attach the other end of the S/S flex line to the  
brass tee(20). FIGURE 14.  
FIGURE 14  
Tee(20)  
7" S/S flex line (22)  
Broilmaster® gas grills and side burners are not  
equipped with pressure regulators. Your gas grill  
operates at a manifold pressure of seven (7")  
inches water column.  
Grill Gas Valve  
Connect cart mounted natural gas grills to a pre-  
installed gas supply line using the twelve (12') foot  
flexible hose and quick disconnect kit supplied or  
specified by the manufacturer.  
Attach one end of the 34" S/S flex line (23) to the  
end of the side burner valve (6).  
CAUTION: THE GRILL AND ITS INDIVIDUAL SHUTOFF  
VALVE MUST BE DISCONNECTED FROM THE GAS SUPPLY  
PIPING SYSTEM DURING ANY SYSTEM PRESSURE TESTING  
AT TEST PRESSURES IN EXCESS OF 1/2 PSIG.  
Attach the remaining end of the S/S flex line to  
the end of the tee(20) connector. FIGURE 15.  
6
20  
34" S/S flex line (23)  
CAUTION: THE GRILL MUST BE ISOLATED FROM THE  
GAS SUPPLY PIPING SYSTEM BY CLOSING ITS INDIVIDUAL  
MANUAL SHUTOFF VALVE DURING ANY PRESSURE  
TESTING OF THE GAS SUPPLY PIPING SYSTEM AT TEST  
PRESSURES EQUAL TO OR LESS THAN 1/2 PSIG.  
FIGURE 15  
Connection Instructions  
The grills natural gas supply line valve installed  
by your gas company must be turned to OFF.  
IMPORTANT: THE GAS SUPPLY LINE MUST HAVE A  
SHUTOFF VALVE INSIDE THE WALL. CONTACT YOUR  
LOCAL GAS COMPANY FOR DIRECTIONS.  
Attach the copper gas supply line to the brass  
tee(20). Use two adjustable wrenches to tighten  
the joint. FIGURE 16.  
Disconnect the copper gas supply line from the  
gas valve located under the grills control panel.  
FIGURE 13.  
FIGURE 16  
Gas Supply Line  
Tee(20)  
FIGURE 13  
Gas Supply Line  
Grill Gas Valve  
Page 12  
DPSBSS  
 
OPERATION AND MAINTENANCE  
Checking for Gas Leaks  
Operating Instructions  
CAUTION: IF A BURNER FAILS TO LIGHT AFTER 5  
SECONDS, TURN THE BURNER OFF FOR 5 MINUTES, TO  
ALLOW THE GAS TO CLEAR, THEN TRY AGAIN.  
Check for gas leaks each time you connect your  
Broilmaster® gas grill and side burner to a propane  
gas cylinder, when a connected cylinder has not  
been used recently, or when the grill and side  
burner are initially used.  
WARNING: NEVER OPERATE THE SIDE BURNER WITH  
THE LID CLOSED.  
CAUTION: DO NOT USE AN OPEN FLAME TO CHECK  
FOR LEAKS. CHECKING FOR LEAKS WITH AN OPEN  
FLAME MAY LEAD TO A FIRE OR EXPLOSION, RESULTING  
IN PROPERTY DAMAGE OR PERSONAL INJURY.  
Care and Cleaning  
CAUTION: TO PREVENT INJURY DO NOT CLEAN SIDE  
BURNER WHILE HOT.  
To check for gas leaks:  
1. Using dish washing detergent and water, make  
a soapy solution.  
For baked on residue use a brass (NOT STEEL)  
brush on the cooking grid.  
2. Turn OFF the knob on both the grill and side  
Clean the exterior regularly with a solution of mild  
detergent and hot water.  
burners control panel.  
3. Turn ON the gas at the supply. Ahissing sound  
indicates a leak. Turn OFF the gas and repair  
all leaks.  
Stainless steel surfaces can be easily cleaned  
with a stainless steel cleaner found at your  
4. If no hissing occurs, apply the soapy solution  
to all gas connections.  
Low Flame Adjustment  
The low flame setting is set at the factory. To adjust  
the flame height at the lowest setting:  
5. Look for bubbles. Bubbles indicate a leak.  
6. If there are bubbles, turn OFF the gas and  
repair all leaks.  
A. Light the side burner  
7. Turn the gas ON and repeat the above  
procedure until all leaks are repaired.  
B. Turn the valve knob to MIN.  
C. Remove the knob and locate the screw in the  
center of the valve stem.  
Operating Instructions  
Using the Igniter  
D. Use a small screwdriver to adjust the flame:  
Clockwise - Lower Flame  
Counterclockwise - Higher Flame  
1. Open the side burner lid.  
2. Push and turn the burner control knob  
counterclockwise to MAX.  
Do not unseat the adjustment screw. If the screw  
is unseated a gas leak will occur at the valve stem.  
3. Push and hold igniter button until burner lights.  
(Approximately 5 seconds).  
NOTE: IF THE FLAME IS ADJUSTED TOO LOW, A STRONG  
WIND COULD BLOW IT OUT. THE FLAME MAXIMUM HEIGHT  
(A) SHOULD BE APPROXIMATELY 1/2 INCH AT THE MINIMUM  
Using Matches  
SETTING. FIGURE 17.  
1. Open the side burner lid.  
FIGURE 17  
BURNER  
2. Light and place a long wooden match next to  
the burner ports under the cooking grid.  
1/2  
3. Push and turn the burner control knob  
counterclockwise to MAX.  
DPSBSS  
Page 13  
 
NOTES  
Page 14  
DPSBSS  
 
NOTES  
DPSBSS  
Page 15  
 
BROILMASTER®  
A Division of Empire Comfort Systems, Inc.  
918 Freeburg Ave.  
Belleville, Illinois 62220  
Phone: 800-255-0403  
RETAIN OWNERS MANUAL FOR FUTURE REFERENCE.  
FORM B100027-2-0202  
Page 16  
DPSBSS  
 

Bissell Vacuum Cleaner 7920 User Manual
Black Decker Impact Driver 90500690 User Manual
Blue Rhino Patio Heater 153300 User Manual
Bosch Appliances Home Security System D623 User Manual
Bose Headphones AE2 User Manual
Carrier Air Conditioner 50LJ User Manual
Carrier Heat Pump 50PSW036 360 User Manual
Casio Clock Radio MO0905 A User Manual
Chicco Stroller 431 User Manual
Cisco Systems IP Phone OL 13674 07 User Manual